Artist Forum banner
1 - 9 of 9 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I am taking in the Bob Ross wet on wet style of painting and need some equipment. I know I can buy Bob's line of products and will for the majority of the supplies that I need but I find that 25 bucks or so for a 2 inch or 1 inch brush is kind of expensive.
I know that his brush line uses natural hog hair but I was wondering if I have to buy natural hair brushes to get the same effect as him, or if I can use a synthetic brush instead. I know synthetic brushes are cheaper than natural hair but you guys are more experienced than me and know more about equipment.
What are your thoughts on the natural hair vs. synthetic hair brushes?
 

· Registered
Joined
·
4 Posts
Brushes

I have purchased Bob ross products from Jerry's Artarama
I have been using the Pro stroke and what I looked for was not a cheap brush as the experience is bad but rather a good brush at a lower cost. I would start there.
These have worked very well for me and the reviews are great (why I tried them)

here is the link for reference: http://www.jerrysartarama.com/discount-art-supplies/brushes-and-palette-knives/oil-and-acrylic-brushes/creative-mark-oil-and-acrylic-brushes/pro-stroke-premium-white-bristle-brushes-and-sets/pro-stroke-premium-white-bristle-brushes.htm

hopes this helps and good luck!
 

· Registered
Joined
·
2 Posts
I suggest buying brushes with lifetime warranties on them. I learned this money saver from my brother who is a carpenter. At first the brushes may be real expensive, but in the long run you'll save a lot of money. But if you plan to paint with oils just a few times, then the cheaper brushes will do. The best types of brushes for oil are bristle, sable for oils, and synthetic brushes. A palette knife is a painting tool you should buy too. It isn't absolutely necessary, but it makes mixing colors easier. :)
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top